Take Up Unit Bearings

Contact Now

The SKF take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals. Explore the variety of take-up units and possible combinations.

Bearing Depot & Supply has a large stock of take-up unit bearings with shaft adjustment where belt tightening devices are required, such as conveyor applications. The take up mounted units are either made of stainless steel or pressed steel. The units consist of a housing and a bearing insert and run a very long time because of their industrial strength and high-quality design. The industrial bearings reduce the friction in the unit and should run quietly when installed properly into the machine or unit.

Bearing Number	Bore Dia	Outer DIa	Width	Size
AMI MUCNST208-24NP Take Up Unit Bearings	4.76 mm	61.8 mm	30.9 mm	77.7 mm
AMI MUCNST207-23NP Take Up Unit Bearings	Available	Hex	Lock Nuts	Metric (Fine) Thread
AMI MUCNST207-20NP Take Up Unit Bearings	120 mm	-40 °C	M12	14 mm
AMI MUCNST206-20NP Take Up Unit Bearings	100 mm	8 Nm	1.78 kg	100 °C
AMI MUCNST205-16NP Take Up Unit Bearings	50.8 mm	48.4 mm	43.55 kN	100 °C
AMI MUCNTPL205-16CEW Take Up Unit Bearings	12 mm	0.41 kg	11,5mm	19 mm
AMI UENTPL204W Take Up Unit Bearings	Needle Roller	130	Radial	59000
AMI UENTPL205-14W Take Up Unit Bearings	605	Round Type	[Steel] Steel	Yes (with retaining
AMI UENTPL204-12W Take Up Unit Bearings	32.5 mm	33 Nm	P313-	93.86 kN
AMI UENTPL208-24W Take Up Unit Bearings	0.48 kg	-20 °C	100 °C	FPL207-
AMI UENTPL208W Take Up Unit Bearings	6	Single	Flange Type	Compact Type
AMI UENTPL207W Take Up Unit Bearings	Compact Type	Available	Yes (with retaining	Flange Type