AMI MUCT206-18 Take Up Unit Bearings

Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):7850; Seal:Silicone; Grease Type:SH44M; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Bearing Unit, Type:Round flange shape; Stroke:No; Accessory:No Cover; Unit, Type:Insert Bearing Unit;

Number of Bearings:Double; Seals:ZZ (Double Shield); Volume Discount:Available; Bearing Retained:No; Flange Shape:Round Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea;

Bearing I.D. d(mm):10; Type:Bearings with Housin; Shape:Flanged Pilot Type; Bearing Part Number:6200; RoHS:6; Bearing Material:[Steel] Steel; Width T(mm):14; Holder Surface Treatment:Clear Anodize; Volume Discount:Available; Number of Bearings:Single;

C:9.55 kN; H:102 mm; Designation of housing:FA203N-; Designation of bearing:US202G2T20; A1:12 mm; L:60 mm; L1:54 mm; C0:4.78 kN; Z:34.8 mm; G:M6x1;

Characteristic inner ring frequency, BPFI:5.38 Hz; B:19 mm; Fatigue limit load, Cu:0.93 kN; d1:54.5 mm; Nref:8,700 rpm; Characteristic cage frequency, FTF:0.4 Hz; rs min:1.1 mm; Brand:SNR; D1:75.6 mm; Da max:78.5 mm;

Designation of closed end cover:SCC205; B:27 mm; T max.:100 °C; Dz:60 mm; E:18 mm; T min.:-20 °C; Designation of open end cover:SCO205-25; H1:15 mm; H:36.5 mm; Designation of housing:PG205N-;

Number of Bearings:Double; RoHS:6; Width T(mm):35; Bearing I.D. d(mm):15; Bearing Retained:No; Volume Discount:Available; Volume Discount:Available; Flange O.D. H(φ):59; Bearing Material:Stainless Steel; Flange Shape:Square Type;

J:76.2 mm; s1:13.5 mm; C0:7.88 kN; H:97 mm; C:14 kN; A:17.5 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FD205-; A2:29.4 mm; T min.:-20 °C;

Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):26700; Unit, Type:Insert Bearing Unit; Diameter series symbol:For Heavy Load; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Pillow Type; Fit:J7; Surface Treatment:No; Machining:No; Seal:Silicone;

Radial clearance class:C3; k:3 mm; D1:85.8 mm; Associated sleeve reference:H2309; Fatigue limit load, Cu:17.2 kN; Brand:SNR; Dynamic load, C:206 kN; b:6.4 mm; ra max:1.5 mm; d:45 mm;

Y2:2.62; da min:16 mm; rs min:0.6 mm; Characteristic rolling element frequency, BSF:4.27 Hz; Da max:28 mm; Radial clearance class:C3; D1:25.1 mm; d:12 mm; D:32 mm; B:10 mm;

Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Bearing I.D. d(mm):10; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Flange O.D. H(φ):56; Width T(mm):55; Bearing Used:Deep Groove Ball Bea;

Fit:J7; Unit Body Material:Shaped steel/Groove-; Basic Load Rating, Dynamic Rating(N):133000; Machining:No; Diameter series symbol:For Heavy Load; Unit, Type:Bearing Unit with Fr; Basic Load Rating, Static Rating(N):96800; Bearing Inner Dia. Shape:Cylindrical Bore Set; RoHS:6; Bearing Unit, Type:Tak

Type:Ball; Volume Discount:Available; Rolling Element Material:52100 Bearing Steel; Load Direction:Radial; Number of Raceway Ring Rows:Single Track; Allowable Rotational Speed(rpm):12000; Inner/Outer Ring Material:52100 Bearing Steel; RoHS:6; Volume Discount:Available; Outer Ring Shape:Standard;

Bearing Unit, Type:Take-Up Type; Fit:J7; Surface Treatment:No; Unit Body Material:Cast Iron; Seal:Silicone; Stroke:No; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Unit, Type:Insert Bearing Unit;