Take Up Unit Bearings

Contact Now

The SKF take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals. Explore the variety of take-up units and possible combinations.

Bearing Depot & Supply has a large stock of take-up unit bearings with shaft adjustment where belt tightening devices are required, such as conveyor applications. The take up mounted units are either made of stainless steel or pressed steel. The units consist of a housing and a bearing insert and run a very long time because of their industrial strength and high-quality design. The industrial bearings reduce the friction in the unit and should run quietly when installed properly into the machine or unit.

Bearing Number	Bore Dia	Outer DIa	Width	Size
AMI UCTX17-55 Take Up Unit Bearings	Flanged Pilot Type	Deep Groove Ball Bea	Clear Anodize	Double
AMI UCTX17-52 Take Up Unit Bearings	16.8 Nm	57.15 mm	FL212N-	250 mm
AMI UCTX10-30 Take Up Unit Bearings	Yes (with retaining	25	Available	ZZ (Double Shield)
AMI UCTX10-32 Take Up Unit Bearings	360 mm	339 mm	25 mm	2.5 mm
AMI UCTX10 Take Up Unit Bearings	Radial	3	Available	440C Stainless Steel
AMI UCTX10-31 Take Up Unit Bearings	Open Type	A	61500	Steel
AMI UCTX09-28 Take Up Unit Bearings	1.5 mm	1.5 mm	27 mm	97.5 kN
AMI UCTX09-27 Take Up Unit Bearings	12.7 mm	37 mm	62	M6x1
AMI UCTX09-26 Take Up Unit Bearings	No	Double	Black Oxide Coating	[Steel] Steel
AMI UCTX09 Take Up Unit Bearings	9	Standard	Single Track	Radial
AMI UCTX08-24 Take Up Unit Bearings	236 mm	34 mm	75 mm	30 mm
AMI UCTX08 Take Up Unit Bearings	Thrust	53500	95	Iron plate punching